Development and Evaluation of a Multiplexed Real-Time TaqMan RT-PCR Assay with a Sample Process Control for Detection of F-specific RNA Coliphage Genogroups I and IV

There are increasing concerns of zoonotic transmission of some animal enteric viruses, such as calicivirus, hepatitis E virus, and rotavirus, which are closely related to human pathogenic strains. Most enteric viruses are detected by molecular techniques because they cannot be cultured. Surrogates such as F-RNA coliphages are cultivable but few molecular methods exist. Individual real-time TaqMan RT-PCR assays for the replicase gene of F-RNA coliphage genogroups I and IV were developed and multiplexed with a real-time TaqMan RT-PCR assay for feline calicivirus as a sample process control for the simultaneous detection and enumeration of genogroup I and IV F-RNA coliphages. Genogroup IV were successfully detected with the multiplexed assay in 80% of fecal samples that contained F-RNA coliphage levels ≥3.2 log plaque forming units (pfu). F-RNA coliphage were at or below the limit of detection in most fecal samples when levels were ≤4 log pfu/g.     

阴离子粘土(LDH)吸附腐殖酸的动力学研究

利用实验室制备的镁铝阴离子粘土材料,研究其吸附水中腐殖酸的动力学.研究结果表明:在初始浓度10～40 mg/L及温度298～323 K的范围内,阴离子粘土对水中腐殖酸的吸附动力学符合拟二级速率方程;阴离子粘土对腐殖酸的吸附符合Langmuir和Freundlich等温吸附方程,吸附是吸热反应,吸附量随温度升高而略有增加,但吸附表观活化能只有15.36 kJ/mol,说明温度对此吸附的影响并不显著.     

Forest policies and programs affecting vulnerability and adaptation to climate change

Due to large scale afforestation programs and forest conservation legislations, India’s total forest area seems to have stabilized or even increased. In spite of such efforts, forest fragmentation and degradation continues, with forests being subject to increased pressure due to anthropogenic factors. Such fragmentation and degradation is leading to the forest cover to change from very dense to moderately dense and open forest and 253 km² of very dense forest has been converted to moderately dense forest, open forest, scrub and non-forest (during 2005–2007). Similarly, there has been a degradation of 4,120 km² of moderately dense forest to open forest, scrub and non-forest resulting in a net loss of 936 km² of moderately dense forest. Additionally, 4,335 km² of open forest have degraded to scrub and non-forest. Coupled with pressure due to anthropogenic factors, climate change is likely to be an added stress on forests. Forest sector programs and policies are major factors that determine the status of forests and potentially resilience to projected impacts of climate change. An attempt is made to review the forest policies and programs and their implications for the status of forests and for vulnerability of forests to projected climate change. The study concludes that forest conservation and development policies and programs need to be oriented to incorporate climate change impacts, vulnerability and adaptation.     

Implications of climate change on mitigation potential estimates for forest sector in India

Climate change is projected to impact forest ecosystems, including biodiversity and Net Primary Productivity (NPP). National level carbon forest sector mitigation potential estimates are available for India; however impacts of projected climate change are not included in the mitigation potential estimates. Change in NPP (in gC/m²/yr) is taken to represent the impacts of climate change. Long term impacts of climate change (2085) on the NPP of Indian forests are available; however no such regional estimates are available for short and medium terms. The present study based on GCM climatology scenarios projects the short, medium and long term impacts of climate change on forest ecosystems especially on NPP using BIOME4 vegetation model. We estimate that under A2 scenario by the year 2030 the NPP changes by (−5) to 40% across different agro-ecological zones (AEZ). By 2050 it increases by 15% to 59% and by 2070 it increases by 34 to 84%. However, under B2 scenario it increases only by 3 to 25%, 3.5 to 34% and (−2.5) to 38% respectively, in the same time periods. The cumulative mitigation potential is estimated to increase by up to 21% (by nearly 1 GtC) under A2 scenario between the years 2008 and 2108, whereas, under B2 the mitigation potential increases only by 14% (646 MtC). However, cumulative mitigation potential estimates obtained from IBIS—a dynamic global vegetation model suggest much smaller gains, where mitigation potential increases by only 6% and 5% during the period 2008 to 2108.     

An abbreviated alternatives assessment process for product designers: a children’s furniture manufacturing case study

Alternatives assessment is becoming increasingly popular to evaluate the potential environmental and human health hazards of materials. A three step process was used to identify and evaluate alternative products for a children's furniture manufacturer. An alternatives assessment framework was developed to analyze alternative mattresses. The framework specifically addresses those environmental and safety attributes applicable to the product and the product components in accordance with the product’s intended use. The result of the assessment allowed the manufacturer to select the most environmentally friendly alternative and eliminate polyvinyl chloride from their product.     

Minimizing leakage from a smelter off-gas system by enhanced control

The off-gas handling system is a vital component of a smelter and it is essential that it operates in accordance with environmental regulations. A key feature of the off-gas management system is maintaining a slightly negative system pressure to prevent gas leakage, such as SO₂, out into the work and external environments. To enhance sustainable development, there is also growing interest in capturing and reusing the significant amount of heat and CO₂ contained within off-gas. The potential incorporation of heat and CO₂ recovery systems places importance on enhancing control to minimize the risk of both gas leakage and disturbance of the smelting process. With these requirements in mind, an easily implementable feedforward control enhancement to existing control schemes is proposed to help provide improved performance.     

Water purification with sintered porous materials fabricated at 400℃ from sea bottom sediments

A sintering technology for preparing porous materials from sea bottom sediments was developed for use in water purification. The purpose of the present study was to develop methods for converting the sea bottom sediments dredged from Ago Bay into value-added recycled products. The sintered products fabricated at 400℃ were found to be very effective adsorbents for the removal of heavy metals.     

Probabilistic impacts of climate change on flood frequency using response surfaces II: Scotland

This paper uses a sensitivity framework approach to look at the probabilistic impacts of climate change on 20-year return period flood peaks, by applying a set of typical response surfaces alongside the probabilistic UK Climate Projections (UKCP09) for 10 river-basin regions over Scotland. The first paper of the pair used the same approach for 10 river-basin regions over England and Wales. This paper develops the methodology for Scotland, by first enabling better estimation of the response type of Scottish catchments. Then, as for England and Wales, the potential range of impacts is shown for different types of catchment in each river-basin region in Scotland, and regional average impact ranges are estimated. Results show clear differences in impacts between catchments of different types and between regions. The Argyll and West Highland regions show the highest impacts, while the North-East Scotland region shows the lowest impacts. The overall ranges are generally smaller for Scotland than England and Wales.